MAX6899PAZT+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. There are 1 functions included in this PMIC so that you can refer to them. A series of 1 channels can be found on this supervisor. In this PMIC, you can find SOT-23-6 Thin, TSOT-23-6 functions for your reference. There are a lot of similarities between this IC management and other Sequencer products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 3.3V. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 6 pins that are attached to IC management. 6 pins are present on the power management system. IC management can only work with a supply voltage of 1.5V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. You should set the supervisor's temperature during -40°C~125°C TA . As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. A maximum supply temperature of 20μA can be used.
MAX6899PAZT+ Features
Sequencer type
Minimum supply voltage of 1.5V
MAX6899PAZT+ Applications
There are a lot of Maxim Integrated MAX6899PAZT+ Voltage Supervisors applications.
- Leakage current detection
- Medical-specific insulation monitor
- Cloud computing
- Linux and server computing
- WiFi router
- Detection of phase imbalance
- Low voltage/high power - AI, GPU
- Leakage protection
- Network equipment
- Military electronics
