MAX6897AALT+T Overview
As you can see, this power management is mounted through 6 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. There are 6-WFDFN functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Sequencer products. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts in a 3.3V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 6 pins are located on this power management. This power management system has 6 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.5V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Mounting type Surface Mount is recommended. We recommend setting the supervisors to -40°C~125°C TA degrees. The output voltage of this power managment ic during operation is Open Drain or Open Collector. The power management's supply current is 10μA. A similar IC managements number of the manufacturer can always be found by using MAX6897, the base power ics number.
MAX6897AALT+T Features
Sequencer type
Minimum supply voltage of 1.5V
10μA operating supply current
MAX6897AALT+T Applications
There are a lot of Maxim Integrated MAX6897AALT+T Voltage Supervisors applications.
- Unattended substation automation
- Microcontroller system
- DSP
- Utility meter
- Magnetic resonance imaging
- Rechargeable batteries
- Transformer load monitoring equipment
- Automotive power systems
- Functional modules
- Automotive permanent magnet synchronous motors
