MAX6884ETP+T Overview
Power management is mounted through 20 terminals. Packaging is in the form of a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. As a reference, this IC power includes 20-WQFN Exposed Pad functions for your convenience. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. Packages are specified to have an average peak reflow temperature of 260. IC management is possible to find a succession of 6 voltages that have been checked. Surface Mount mounts IC management. It has a total of 20 pins that are attached to IC management. This power management system has 20 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2.7V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.8V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~85°C TA degrees. While this power management is operating, it will output Open Drain, Push-Pull as the output voltage. As far as the supply current of the power management is concerned, it is 1.1mA. A similar IC managements number of the manufacturer can always be found by using MAX6884, the base power ics number.
MAX6884ETP+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
1.1mA operating supply current
MAX6884ETP+T Applications
There are a lot of Maxim Integrated MAX6884ETP+T Voltage Supervisors applications.
- Leakage current detection
- Household appliances
- Embedded computing
- Detection of phase imbalance
- Digitally controlled LDO regulators circuit
- Sensitive sensors
- Consumer electronics
- Detection of phase sequence
- Power distribution systems of ICU
- Insulation fault location system
