MAX6869UK20D3S+T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. A Tape & Reel (TR) package is used to package the power management. The purpose of this IC management is to provide you with a reference of 1 functions. Power management consists of 1 channels, each of which can be used independently. Please refer to power management for SC-74A, SOT-753 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When 2.5V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. The power management belongs to the Power Management Circuits subcategory. In total, IC powers are 5 pins on the board. This power management has 5 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The power management's supply current is 7μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6869, which is the base power ics number.
MAX6869UK20D3S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6869UK20D3S+T Applications
There are a lot of Maxim Integrated MAX6869UK20D3S+T Voltage Supervisors applications.
- Medical-specific insulation monitor
- Efficient information transmission
- Functional modules
- Analog circuit
- Detection of phase sequence
- Solar power charger
- Sensitive sensors
- Kitchen appliances
- Computer applications
- Military electronics
