MAX6868UK18D1S+T Overview
There are 5 terminals connected to this power management, which makes it easy to mount. Tape & Reel (TR)-packaging is used. Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find SOT-23 functions for you to refer to. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. During operation, the power ic is supplied with a voltage of 2.5V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts IC management. It is possible to subcategorize this power ic as a Power Management Circuits chip. A total of 5 pins are located on this power management. Pin count of the power management is 5. There should be a minimum voltage supply (Vsup) of 1.1V for this PMIC. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The power management's supply current is 7μA.
MAX6868UK18D1S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6868UK18D1S+T Applications
There are a lot of Maxim Integrated MAX6868UK18D1S+T Voltage Supervisors applications.
- Transformer load monitoring equipment
- Leakage current detection
- Electric heating appliances
- Power distribution systems of ICU
- Telecommunications equipment
- Electrical fire monitoring system
- Fire equipment power monitoring system
- WiFi router
- Display equipment
- emergency room
