MAX6866UK26D3S+T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Strip-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. To assist you, this PMIC includes SOT-23 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. IC management conducts at a voltage of 2.5V. In a 1 supply voltage, the PMIC chip conducts. The mount is provided by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 5 pins that are attached to IC management. Pin count of the power management is 5. It is recommended that Vsup should not be less than 1.1V for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. There is a supply current of 7μA for the power management.
MAX6866UK26D3S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6866UK26D3S+T Applications
There are a lot of Maxim Integrated MAX6866UK26D3S+T Voltage Supervisors applications.
- Embedded computing
- Automotive power systems
- Power distribution systems of ICU
- Efficient information transmission
- Transformer load monitoring equipment
- Power distribution systems of operating room
- Military electronics
- WiFi router
- Computer applications
- Military communications
