MAX6865UK45D4S+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. In terms of packaging, power management follows the Tape & Reel (TR) model. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. Please refer to power management for SC-74A, SOT-753 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. The supervisor is always powered by a 2.5V volt supply. In a 1 supply voltage, the PMIC chip conducts. By Surface Mount, IC management has been mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 5 pins on the board. 5 pins are on the supervisor. It is recommended that Vsup should not be less than 1.1V for this IC power. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The supply current of the power management is 7μA. To find similar IC managements from the manufacturer, you can always search by MAX6865.
MAX6865UK45D4S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK45D4S+T Applications
There are a lot of Maxim Integrated MAX6865UK45D4S+T Voltage Supervisors applications.
- Telecommunications equipment
- Rechargeable batteries
- Smartphones
- Military communications
- emergency room
- Data storage applications
- Fire equipment power monitoring system
- Power communication system
- Smart meter
- Microcontroller system
