MAX6865UK45D3S+T Overview
A total of 5 terminals are used to mount this power management. Tape & Reel (TR)-packaging is used. To assist you, this IC power includes 1 functions. This power management is made up of 1 channels which are available in a series format. To assist you, this PMIC includes SC-74A, SOT-753 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. The supervisor is always powered by a 2.5V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. The total number of pins on this power management is 5. 5 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 7μA. It is always advisable to use MAX6865, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6865UK45D3S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK45D3S+T Applications
There are a lot of Maxim Integrated MAX6865UK45D3S+T Voltage Supervisors applications.
- DVR
- Important electronics for automotive protection
- Multi-voltage system
- DC stabilized power supply module
- Power distribution systems of CCU
- Stable power system
- Network equipment
- Important electronics for automotive safety
- Personal computers
- Power distribution systems of operating room
