MAX6865UK43D6L+T Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. Power management consists of 1 channels, each of which can be used independently. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. The supervisor is always powered by a 2.5V volt supply. Power ics operate at 1 supply voltages. Surface Mount is the one that mounts power management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, the power management has 5 pins in it. There are 5 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. For this power management, there is an 7μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MAX6865, the base power ics number.
MAX6865UK43D6L+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK43D6L+T Applications
There are a lot of Maxim Integrated MAX6865UK43D6L+T Voltage Supervisors applications.
- Rechargeable batteries
- Analog circuit
- Multi-voltage system
- Battery-powered equipment
- Telecommunications equipment
- Consumer electronics
- emergency room
- WiFi router
- Data storage applications
- Leakage protection
