MAX6865UK43D2S+T Overview
This power management consists of 5 mounting terminals on which it can be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts in a 2.5V-voltage supply. When 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 5 pins that are attached to IC management. 5 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The mounting type of the supervisors is Surface MountThis range of temperature should be set for the supervisors: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. For this power management, there is an 7μA volt supply current. For similar manage ics search of the manufacturer, you can always refer to MAX6865, the base PMIC number.
MAX6865UK43D2S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK43D2S+T Applications
There are a lot of Maxim Integrated MAX6865UK43D2S+T Voltage Supervisors applications.
- DC stabilized power supply module
- Important electronics for automotive protection
- Microprocessor system
- Medical-specific insulation monitor
- Solar power charger
- Cloud computing
- Military electronics
- Detection of phase loss
- Military communications
- Precision measurement
