MAX6865UK42D2S+T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Tape & Reel (TR)-packaging is used. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Packages are specified to have an average peak reflow temperature of 260. When 2.5V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. There is a subcategory called Power Management Circuits for this power management. A total of 5 pins are located on this power management. 5 pins are present on the power management system. Supply voltage (Vsup) should be at least 1.1V for this power management. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management recommends the Surface Mount mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The supply current of the power management is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6865, the base power ics number.
MAX6865UK42D2S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK42D2S+T Applications
There are a lot of Maxim Integrated MAX6865UK42D2S+T Voltage Supervisors applications.
- Military electronics
- DC stabilized power supply module
- Leakage protection
- Set top box
- Medical-specific isolation transformer
- FPGA design
- Power communication system
- Computer applications
- Transformer load monitoring equipment
- Military communications
