MAX6865UK41D1S+T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. Manage ics operate at 2.5V supply voltages. When 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 5. The pins of the power management system count 5. A voltage (Vsup) that doesn't fall below 1.1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The supply current of the power management is 7μA. You can always use MAX6865, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX6865UK41D1S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK41D1S+T Applications
There are a lot of Maxim Integrated MAX6865UK41D1S+T Voltage Supervisors applications.
- Efficient information transmission
- FPGA design
- Precision measurement
- Stable power system
- Leakage current detection
- Telecommunications equipment
- Medical-specific isolation transformer
- Urban rail transit weak current power monitoring
- Power distribution systems of infant care room
- Digitally controlled LDO regulators circuit
