MAX6865UK40D3S+T Overview
A total of 5 terminals are used to mount this power management. It is packaged with Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. On this supervisor, there is a series of 1 channels that can be found. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 5 pins that are attached to IC management. This power management has 5 pins. It is recommended that Vsup should not be less than 1.1V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~85°C TA degrees. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. For this power management, there is an 7μA volt supply current. You can always use MAX6865, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX6865UK40D3S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK40D3S+T Applications
There are a lot of Maxim Integrated MAX6865UK40D3S+T Voltage Supervisors applications.
- Fire equipment power monitoring system
- Transformer load monitoring equipment
- Battery-powered equipment
- Insulation fault location system
- Unattended substation automation
- Automotive power systems
- DVR
- Data storage applications
- Medical-specific insulation monitor
- emergency room
