MAX6865UK38D6S+T Overview
This power management consists of 5 mounting terminals on which it can be mounted. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. There is a specification for the peak reflow temperature of the package to be 260. During operation, the power ic is supplied with a voltage of 2.5V. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Surface Mount mount. This power ic can be sub-categorized as Power Management Circuits. In total, it has 5 pins on IC management. This power management system has 5 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. There is a 7μA supply current present in the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6865, which is the base power ics number.
MAX6865UK38D6S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK38D6S+T Applications
There are a lot of Maxim Integrated MAX6865UK38D6S+T Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Dash board
- Medical-specific isolation transformer
- Linux and server computing
- Urban rail transit weak current power monitoring
- Rechargeable batteries
- Radio
- DSP
- Functional modules
- Microcontroller system
