MAX6865UK34D5L+T Overview
This power management consists of 5 mounting terminals on which it can be mounted. Tape & Reel (TR)-packaging is used. Power management is possible to find a series of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. Please refer to power management for SC-74A, SOT-753 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 2.5V. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 5 pins on IC management. This power management has 5 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.1V, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The power management's supply current is 7μA. It is always advisable to use MAX6865, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6865UK34D5L+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK34D5L+T Applications
There are a lot of Maxim Integrated MAX6865UK34D5L+T Voltage Supervisors applications.
- Medical-specific insulation monitor
- Automotive permanent magnet synchronous motors
- Multi-voltage system
- Magnetic resonance imaging
- Leakage protection
- emergency room
- Set top box
- Utility meter
- Efficient information transmission
- Solar power charger
