MAX6865UK34D4S+T Overview
A total of 5 terminals are used to mount this power management. It is packaged with Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. There is a subcategory called Power Management Circuits for this power management. 5 pins are present in total in this power management. Power managment ic pin count is 5. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a supply current of 7μA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6865, which is the base power ics number.
MAX6865UK34D4S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK34D4S+T Applications
There are a lot of Maxim Integrated MAX6865UK34D4S+T Voltage Supervisors applications.
- DSP
- Transformer load monitoring equipment
- DC stabilized power supply module
- Consumer electronics
- Efficient information transmission
- Radar
- Detection of phase imbalance
- Dash board
- Satellite navigation
- Magnetic resonance imaging
