MAX6865UK32D6S+T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. This power ic is packaged in a way that looks like a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels available on this supervisor, and each channel has a different function. Please refer to power management for SC-74A, SOT-753 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. When 2.5V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by Surface Mount. The power management belongs to the Power Management Circuits subcategory. In total, it has 5 pins on IC management. Power managment ic pin count is 5. There should be a minimum voltage supply (Vsup) of 1.1V for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. There is a supply current of 7μA for the power management. You can always use MAX6865, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX6865UK32D6S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK32D6S+T Applications
There are a lot of Maxim Integrated MAX6865UK32D6S+T Voltage Supervisors applications.
- Leakage protection
- Power communication system
- Sensitive sensors
- Analog circuit
- Battery cars
- Automotive permanent magnet synchronous motors
- Electronics installed in the vehicle
- DSP
- Rechargeable batteries
- Medical-specific isolation transformer
