MAX6865UK32D4S+T Overview
As you can see, this power management is mounted through 5 terminals. A Tape & Reel (TR) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 2.5V. IC management is possible to find a succession of 1 voltages that have been checked. The power management is mounted by a Surface Mount-axis. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 5 pins on IC management. 5 pins are on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supervisor's supply current is specified to 7μA. To find similar IC managements from the manufacturer, you can always search by MAX6865.
MAX6865UK32D4S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK32D4S+T Applications
There are a lot of Maxim Integrated MAX6865UK32D4S+T Voltage Supervisors applications.
- Electric heating appliances
- Digitally controlled LDO regulators circuit
- Insulation fault location system
- Power communication system
- Data storage applications
- Magnetic resonance imaging
- Consumer electronics
- Detection of phase sequence
- External alarm
- Multi-voltage system
