MAX6865UK31D4S+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. A Tape & Reel (TR) package is used to package the power management. Please find attached 1 functions for your reference in this IC power. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. The package peak reflow temperature is specified to be 260. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts IC management. There is a subcategory of this power ic known as Power Management Circuits. In total, it has 5 pins on IC management. Power managment ic pin count is 5. It is recommended that Vsup should not be less than 1.1V for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. You should set the supervisor's temperature during -40°C~85°C TA . During operation, this power management system outputs Push-Pull, Totem Pole. The supervisor's supply current is specified to 7μA. For similar manage ics search of the manufacturer, you can always refer to MAX6865, the base PMIC number.
MAX6865UK31D4S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK31D4S+T Applications
There are a lot of Maxim Integrated MAX6865UK31D4S+T Voltage Supervisors applications.
- Telecommunications equipment
- Solar power charger
- Detection of phase imbalance
- DVR
- Unattended substation automation
- Battery cars
- Radar
- Electronics installed in the vehicle
- DSP
- Insulation fault location system
