MAX6865UK29D2L+T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. It is packaged with Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. IC management conducts at a voltage of 2.5V. IC management conducts in a 1-voltage supply. Power management is included in the Surface Mount mount. The power management belongs to the Power Management Circuits subcategory. Power management has a total of 5 pins. Pin count of the power management is 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 7μA. It is always advisable to use MAX6865, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6865UK29D2L+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK29D2L+T Applications
There are a lot of Maxim Integrated MAX6865UK29D2L+T Voltage Supervisors applications.
- Electronics installed in the vehicle
- Dash board
- Embedded computing
- Display equipment
- Detection of phase sequence
- Consumer electronics
- Power communication system
- External alarm
- Computer applications
- Urban rail transit weak current power monitoring
