MAX6865UK23D4L+T Overview
There are 5 terminals on this power management that allow it to be mounted. Power management is packaged in a Tape & Reel (TR) way. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. Manage ics operate at 2.5V supply voltages. During operation, the power ic is supplied with a voltage of 1. Power management is included in the Surface Mount mount. There is a subcategory of this power ic known as Power Management Circuits. In total, it has 5 pins on IC management. This power management system has 5 pins. A voltage (Vsup) that doesn't fall below 1.1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type is Surface Mount. We recommend setting the supervisors to -40°C~85°C TA degrees. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a supply current of 7μA for the power management. It is always advisable to use MAX6865, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6865UK23D4L+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK23D4L+T Applications
There are a lot of Maxim Integrated MAX6865UK23D4L+T Voltage Supervisors applications.
- Multi-voltage system
- Power distribution systems of ICU
- Network equipment
- Stable power system
- Military electronics
- Microprocessor system
- Power distribution systems of infant care room
- Leakage current detection
- Magnetic resonance imaging
- Embedded computing
