MAX6865UK22D1S+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Power management is packaged in a Tape & Reel (TR) way. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. Please refer to power management for SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Packages are specified to have an average peak reflow temperature of 260. The supervisor is always powered by a 2.5V volt supply. Power management conducts at a voltage of 1. The mount is provided by Surface Mount. There is a subcategory called Power Management Circuits for this power management. A total of 5 pins are located on this power management. There are 5 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 7μA is the recommended value. It is always advisable to use MAX6865, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6865UK22D1S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK22D1S+T Applications
There are a lot of Maxim Integrated MAX6865UK22D1S+T Voltage Supervisors applications.
- FPGA design
- Leakage current detection
- Microprocessor system
- Magnetic resonance imaging
- Household appliances
- Power distribution systems of infant care room
- Automotive permanent magnet synchronous motors
- DSP
- Smart meter
- Low voltage/high power - AI, GPU
