MAX6865UK21D3S+T Overview
This power management consists of 5 mounting terminals on which it can be mounted. It is packaged with Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. A series of 1 channels can be found on this supervisor. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. The supervisor is always powered by a 2.5V volt supply. During operation, the power ic is supplied with a voltage of 1. Power management is included in the Surface Mount mount. The power management belongs to the Power Management Circuits subcategory. In total, IC powers are 5 pins on the board. This power management has 5 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. For this power management, there is an 7μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MAX6865, the base power ics number.
MAX6865UK21D3S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK21D3S+T Applications
There are a lot of Maxim Integrated MAX6865UK21D3S+T Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Solar power charger
- Network equipment
- Telecommunications equipment
- Important electronics for automotive protection
- Battery cars
- Important electronics for automotive safety
- Data storage applications
- Military communications
- Display equipment
