MAX6865UK20D5L+T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. This power ic is packaged in a way that looks like a Tape & Reel (TR). Power management is possible to find a series of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. IC management is packaged as a SC-74A, SOT-753 package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 240. In a 2.5V supply voltage, the power management conducts. Power ics operate at 1 supply voltages. The power management is mounted by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, it has 5 pins on IC management. 5 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. Supplied with a operating current of 7μA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using MAX6865, the base power ics number.
MAX6865UK20D5L+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK20D5L+T Applications
There are a lot of Maxim Integrated MAX6865UK20D5L+T Voltage Supervisors applications.
- Power distribution systems of infant care room
- Medical-specific isolation transformer
- Leakage protection
- Dash board
- Battery cars
- Electric heating appliances
- Rechargeable batteries
- DVR
- Detection of phase imbalance
- Military electronics
