MAX6865UK20D4S+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. It is packaged with Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 2.5V. In a 1 supply voltage, the PMIC chip conducts. Using Surface Mount, IC management is mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 5 pins on power management. Pin count of the power management is 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. There is a supply current of 7μA for the power management. To find similar IC managements from the manufacturer, you can always search by MAX6865.
MAX6865UK20D4S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK20D4S+T Applications
There are a lot of Maxim Integrated MAX6865UK20D4S+T Voltage Supervisors applications.
- Solar power charger
- Analog circuit
- Important electronics for automotive safety
- Insulation fault location system
- Magnetic resonance imaging
- Telecommunications equipment
- Kitchen appliances
- Radar
- Low voltage/high power - AI, GPU
- Automotive power systems
