MAX6865UK19D6S+T Overview
This power management consists of 5 mounting terminals on which it can be mounted. It is packaged with Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. On this supervisor, there is a series of 1 channels that can be found. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. During the reflow process, a peak temperature of 260 is specified for the package. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. Power management conducts at a voltage of 1. Surface Mount mounts IC management. This power ic can be sub-categorized as Power Management Circuits. A total of 5 pins are located on this power management. Pin count of the power management is 5. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 7μA. It is always advisable to use MAX6865, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6865UK19D6S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK19D6S+T Applications
There are a lot of Maxim Integrated MAX6865UK19D6S+T Voltage Supervisors applications.
- Display equipment
- Stable power system
- Smart meter
- Personal computers
- Detection of phase loss
- Leakage current detection
- Insulation fault location system
- Kitchen appliances
- Electric heating appliances
- Microprocessor system
