MAX6865UK18D5S+T Overview
A total of 5 terminals are used to mount this power management. There is a Tape & Reel (TR)-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. During operation, the power ic is supplied with a voltage of 2.5V. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Power management has a total of 5 pins. 5 pins are on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Mounting type Surface Mount is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The power management's supply current is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6865, the base power ics number.
MAX6865UK18D5S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK18D5S+T Applications
There are a lot of Maxim Integrated MAX6865UK18D5S+T Voltage Supervisors applications.
- Battery cars
- Battery cars
- Medical-specific insulation monitor
- Power distribution systems of infant care room
- Microcontroller system
- Leakage current detection
- Multi-voltage system
- Efficient information transmission
- Important electronics for automotive protection
- Power communication system
