MAX6865UK18D3S+T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. This power management is made up of 1 channels which are available in a series format. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. Manage ics operate at 2.5V supply voltages. Power management conducts at a voltage of 1. The mount is provided by Surface Mount. The power management belongs to the Power Management Circuits subcategory. 5 pins are present in total in this power management. The pins of the power management system count 5. IC management can only work with a supply voltage of 1.1V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount mounting is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. There is a 7μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX6865, the base power ics number.
MAX6865UK18D3S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK18D3S+T Applications
There are a lot of Maxim Integrated MAX6865UK18D3S+T Voltage Supervisors applications.
- Important electronics for automotive safety
- Utility meter
- Dash board
- Personal computers
- DSP
- emergency room
- Precision measurement
- Electronics installed in the vehicle
- Telecommunications equipment
- Smart meter
