MAX6865UK17D2L+T Overview
A total of 5 terminals are used to mount this power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. Please refer to power management for SC-74A, SOT-753 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 2.5V. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 5 pins that are attached to IC management. There are 5 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. Supplied with a operating current of 7μA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6865, which is the base power ics number.
MAX6865UK17D2L+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK17D2L+T Applications
There are a lot of Maxim Integrated MAX6865UK17D2L+T Voltage Supervisors applications.
- Set top box
- Medical-specific isolation transformer
- Magnetic resonance imaging
- Insulation fault location system
- DSP
- Network equipment
- Transformer load monitoring equipment
- WiFi router
- Power distribution systems of infant care room
- Utility meter
