MAX6864UK45D6L+T Overview
Power management is mounted through 5 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. In this IC management you will find SOT-23-5 functions for you to refer to. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 2.5V. Power management conducts at a voltage of 1. Surface Mount mounts power management on the wall. The power management system can be categorized as a Power Management Circuits chip. In total, the power management has 5 pins in it. 5 pins make up the power management. Supply voltage (Vsup) should be at least 1.1V for this power management. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Supplied with a operating current of 7μA, this PMIC is capable of fully function as specified.
MAX6864UK45D6L+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6864UK45D6L+T Applications
There are a lot of Maxim Integrated MAX6864UK45D6L+T Voltage Supervisors applications.
- Battery-powered equipment
- Detection of phase loss
- Consumer electronics
- DC stabilized power supply module
- Battery cars
- Analog circuit
- WiFi router
- Set top box
- Automotive permanent magnet synchronous motors
- Urban rail transit weak current power monitoring
