MAX6864UK18D4S+T Overview
This power management consists of 5 mounting terminals on which it can be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for SC-74A, SOT-753 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 2.5V. IC management conducts in a 1-voltage supply. Using Surface Mount, IC management is mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 5 pins on power management. Pin count of the power management is 5. It is recommended that Vsup should not be less than 1.1V for this IC power. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The power management's supply current is 7μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6864, which is the base power ics number.
MAX6864UK18D4S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6864UK18D4S+T Applications
There are a lot of Maxim Integrated MAX6864UK18D4S+T Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Automotive power systems
- Personal computers
- Electric heating appliances
- Low voltage/high power - AI, GPU
- Multi-voltage system
- Unattended substation automation
- Consumer electronics
- Detection of phase imbalance
- Electrical fire monitoring system
