Name: MAX6864UK17D3S+T
Brand: Maxim Integrated
SKU: MAX6864UK17D3S+T
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Number of Pins	5
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2006
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Terminal Finish	MATTE TIN
Subcategory	Power Management Circuits
Max Power Dissipation	571mW
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	MAX6864
Output	Push-Pull, Totem Pole
Pin Count	5
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.1V
Operating Supply Current	7μA
Adjustable Threshold	NO
Watchdog Timer	Yes
Reset	Active Low
Voltage - Threshold	1.665V
Number of Voltages Monitored	1
Reset Timeout	150ms Minimum
Min Reset Threshold Voltage	1.623V
Max Reset Threshold Voltage	1.707V
Undervoltage Threshold	1.623V
Overvoltage Threshold	1.707V
Length	2.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX6864UK17D3S+T Product Details

MAX6864UK17D3S+T Overview

As you can see, this power management is mounted through 5 terminals. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please refer to this PMIC for 1 functions. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. When 2.5V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts power management on the wall. There is a subcategory called Power Management Circuits for this power management. It has a total of 5 pins that are attached to IC management. 5 pins are on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.1V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 7μA. It is always advisable to use MAX6864, the base supervisor number, when searching for similar PMICs from the manufacturer.