MAX6863UK16+T Overview
It is mounted through 5 terminals on the power management. Tape & Reel (TR)-packaging is used. As a reference, this IC management includes 1 functions for your convenience. It is possible to find on this power management a series of 1 channels. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 2.5V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. The power management system can be categorized as a Power Management Circuits chip. In total, IC powers are 5 pins on the board. This power management system has 5 pins. There should be a minimum voltage supply (Vsup) of 1.1V for this PMIC. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The supervisor's supply current is specified to 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6863, the base power ics number.
MAX6863UK16+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6863UK16+T Applications
There are a lot of Maxim Integrated MAX6863UK16+T Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Computer applications
- Power distribution systems of infant care room
- Important electronics for automotive protection
- Unattended substation automation
- Personal computers
- DVR
- Radio
- Smartphones
- Leakage protection
