Name: MAX6861UK26+T
Brand: Maxim Integrated
SKU: MAX6861UK26+T
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Number of Pins	5
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2006
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Terminal Finish	Matte Tin (Sn)
Subcategory	Power Management Circuits
Max Power Dissipation	571mW
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Base Part Number	MAX6861
Output	Push-Pull, Totem Pole
Pin Count	5
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.1V
Operating Supply Current	7μA
Adjustable Threshold	NO
Watchdog Timer	No
Reset	Active Low
Voltage - Threshold	2.625V
Number of Voltages Monitored	1
Reset Timeout	Adjustable/Selectable
Min Reset Threshold Voltage	2.559V
Max Reset Threshold Voltage	2.691V
Undervoltage Threshold	2.559V
Overvoltage Threshold	2.691V
Length	2.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX6861UK26+T Product Details

MAX6861UK26+T Overview

It is mounted through 5 terminals on the power management. In terms of packaging, power management follows the Tape & Reel (TR) model. In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. There is a specification for the peak reflow temperature of the package to be 260. When a supply voltage of 2.5V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. The power management belongs to the Power Management Circuits subcategory. Power management has a total of 5 pins. The pins of the power management system count 5. A voltage (Vsup) that doesn't fall below 1.1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~85°C TA degrees. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 7μA volt supply current. To find similar IC managements from the manufacturer, you can always search by MAX6861.