Welcome to Hotenda.com Online Store!

logo
userjoin
Home

MAX6861UK25+T

MAX6861UK25+T

MAX6861UK25+T

Maxim Integrated

2.5V5 Terminals 5-Pin MAX6861 Voltage supervisor1 Channels Min 1.1V Max 5.5V

SOT-23

MAX6861UK25+T Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Operating Temperature-40°C~85°C TA
PackagingTape & Reel (TR)
Published 2006
JESD-609 Code e3
Pbfree Code yes
Part StatusActive
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish MATTE TIN
Subcategory Power Management Circuits
Max Power Dissipation571mW
Technology BICMOS
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.5V
[email protected] Reflow Temperature-Max (s) 40
Base Part Number MAX6861
Output Push-Pull, Totem Pole
Pin Count5
Number of Channels 1
Max Supply Voltage5.5V
Min Supply Voltage1.1V
Operating Supply Current 7μA
Adjustable Threshold NO
Watchdog TimerNo
Reset Active Low
Voltage - Threshold 2.5V
Number of Voltages Monitored1
Reset Timeout Adjustable/Selectable
Min Reset Threshold Voltage 2.438V
Max Reset Threshold Voltage 2.563V
Undervoltage Threshold2.438V
Overvoltage Threshold2.563V
Length 2.9mm
RoHS StatusROHS3 Compliant
Lead Free Lead Free
In-Stock:3945 items

MAX6861UK25+T Product Details

MAX6861UK25+T Overview


There are 5 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes SC-74A, SOT-753 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 2.5V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 5 pins on the board. There are 5 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 1.1V for this PMIC. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. For this power management, there is an 7μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MAX6861, the base power ics number.

MAX6861UK25+T Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6861UK25+T Applications


There are a lot of Maxim Integrated MAX6861UK25+T Voltage Supervisors applications.

  • Battery-powered equipment
  • Electrical fire monitoring system
  • Medical-specific isolation transformer
  • Military communications
  • Insulation fault location system
  • Consumer electronics
  • Military electronics
  • Automotive power systems
  • Stable power system
  • Power distribution systems of ICU

Get Subscriber

Enter Your Email Address, Get the Latest News