MAX6861UK20+T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. During the reflow process, a peak temperature of 260 is specified for the package. When a supply voltage of 2.5V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. This power ic can be sub-categorized as Power Management Circuits. In total, the power management has 5 pins in it. There are 5 pins on the supervisor. IC management can only work with a supply voltage of 1.1V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The supervisor's supply current is specified to 7μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6861, which is the base power ics number.
MAX6861UK20+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6861UK20+T Applications
There are a lot of Maxim Integrated MAX6861UK20+T Voltage Supervisors applications.
- Solar power charger
- Detection of phase sequence
- Sensitive sensors
- Detection of phase imbalance
- Efficient information transmission
- Microprocessor system
- Microcontroller system
- Personal computers
- Battery cars
- Battery-powered equipment
