MAX6860UK29D3+T Overview
It is mounted through 5 terminals on the power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 1 channels, each of which can be used independently. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Packages are specified to have an average peak reflow temperature of 260. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 5 pins in it. Power managment ic pin count is 5. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~85°C. Power management has an output of Open Drain or Open Collector during operation. For this power management, there is an 7μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MAX6860, the base power ics number.
MAX6860UK29D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6860UK29D3+T Applications
There are a lot of Maxim Integrated MAX6860UK29D3+T Voltage Supervisors applications.
- Linux and server computing
- Insulation fault location system
- Analog circuit
- Power distribution systems of infant care room
- Detection of phase loss
- Important electronics for automotive protection
- Stable power system
- Power distribution systems of operating room
- WiFi router
- Medical-specific isolation transformer