MAX6860UK27D5+T Overview
Power management is mounted through 5 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. According to the specification, the package's peak reflow temperature is specified to be 260. When 2.5V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. Surface Mount is the one that mounts power management. The power management belongs to the Power Management Circuits subcategory. The total number of pins on this power management is 5. Pin count of the power management is 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. We recommend setting the supervisors to -40°C~85°C degrees. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The power management's supply current is 7μA. It is always advisable to use MAX6860, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6860UK27D5+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6860UK27D5+T Applications
There are a lot of Maxim Integrated MAX6860UK27D5+T Voltage Supervisors applications.
- Data storage applications
- DSP
- Precision measurement
- FPGA design
- Low voltage/high power - AI, GPU
- Smart meter
- Urban rail transit weak current power monitoring
- Kitchen appliances
- Automotive permanent magnet synchronous motors
- Electrical fire monitoring system
