MAX6858UK22D3+T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 2.5V is used to conduct the PMIC chip. Power ics operate at 1 supply voltages. Power management is included in the Surface Mount mount. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 5 pins on the board. The pins of the power management system count 5. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a 7μA supply current present in the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6858, which is the base power ics number.
MAX6858UK22D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6858UK22D3+T Applications
There are a lot of Maxim Integrated MAX6858UK22D3+T Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Fire equipment power monitoring system
- Analog circuit
- Microcontroller system
- Battery cars
- Automotive power systems
- Leakage protection
- Embedded computing
- Important electronics for automotive protection
- Functional modules
