MAX6855UK43D5+T Overview
It is mounted through 5 terminals on the power management. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. In a 2.5V supply voltage, the power management conducts. Power management conducts at a voltage of 1. The power management is mounted by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, it has 5 pins on IC management. There are 5 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. Supplied with a operating current of 7μA, this PMIC is capable of fully function as specified. It is always advisable to use MAX6855, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6855UK43D5+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6855UK43D5+T Applications
There are a lot of Maxim Integrated MAX6855UK43D5+T Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Precision measurement
- Medical-specific insulation monitor
- emergency room
- Consumer electronics
- Detection of phase imbalance
- Power distribution systems of infant care room
- Personal computers
- FPGA design
- Leakage current detection
