MAX6855UK43D4+T Overview
It is mounted through 5 terminals on the power management. A Tape & Reel (TR) package is used to package the power management. The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. There is a specification for the peak reflow temperature of the package to be 260. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 5 pins on the board. 5 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 1.1V for this PMIC. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 7μA. It is always advisable to use MAX6855, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6855UK43D4+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6855UK43D4+T Applications
There are a lot of Maxim Integrated MAX6855UK43D4+T Voltage Supervisors applications.
- Important electronics for automotive protection
- Computer applications
- Power distribution systems of CCU
- Radar
- emergency room
- Battery-powered equipment
- Power distribution systems of ICU
- WiFi router
- Medical-specific isolation transformer
- Radio