MAX6855UK43D1+T Overview
A total of 5 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 2.5V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Power management is included in the Surface Mount mount. This power ic can be sub-categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 5. 5 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. A Surface Mount mounting type is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. There is a 7μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX6855, the base power ics number.
MAX6855UK43D1+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6855UK43D1+T Applications
There are a lot of Maxim Integrated MAX6855UK43D1+T Voltage Supervisors applications.
- Data storage applications
- Microprocessor system
- Medical-specific insulation monitor
- Low voltage/high power - AI, GPU
- Power distribution systems of infant care room
- Computer applications
- Dash board
- Smartphones
- Personal computers
- Electric heating appliances
