MAX6855UK41D5+T Overview
As you can see, this power management is mounted through 5 terminals. Power management is packaged in a Tape & Reel (TR) way. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for SC-74A, SOT-753 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 2.5V. IC management is possible to find a succession of 1 voltages that have been checked. The mount is provided by Surface Mount. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 5 pins on the board. The pins of the power management system count 5. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The supervisor's supply current is specified to 7μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6855, which is the base power ics number.
MAX6855UK41D5+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6855UK41D5+T Applications
There are a lot of Maxim Integrated MAX6855UK41D5+T Voltage Supervisors applications.
- Battery cars
- Sensitive sensors
- DVR
- Detection of phase loss
- Solar power charger
- Important electronics for automotive safety
- Microcontroller system
- Detection of phase sequence
- Medical-specific insulation monitor
- Battery cars
