MAX6855UK26D5+T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaging is in the form of a Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. This power management is made up of 1 channels which are available in a series format. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 2.5V supply voltages. In a 1 supply voltage, the PMIC chip conducts. By Surface Mount, IC management has been mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 5 pins in it. 5 pins are present on the power management system. Supply voltage (Vsup) should be at least 1.1V for this power management. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~85°C TA . While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. In order to maintain a stable supply current for the power management, 7μA is the recommended value. It is always advisable to use MAX6855, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6855UK26D5+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6855UK26D5+T Applications
There are a lot of Maxim Integrated MAX6855UK26D5+T Voltage Supervisors applications.
- Stable power system
- Microcontroller system
- Automotive permanent magnet synchronous motors
- Low voltage/high power - AI, GPU
- Consumer electronics
- Power distribution systems of ICU
- Radio
- Household appliances
- Utility meter
- Power distribution systems of infant care room
