MAX6855UK26D3+T Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Tape & Reel (TR)-packaging is used. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 5 pins. This power management system has 5 pins. It is recommended that Vsup should not be less than 1.1V for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. As far as the supply current of the power management is concerned, it is 7μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6855, which is the base power ics number.
MAX6855UK26D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6855UK26D3+T Applications
There are a lot of Maxim Integrated MAX6855UK26D3+T Voltage Supervisors applications.
- Power distribution systems of operating room
- Utility meter
- Electronics installed in the vehicle
- Medical-specific insulation monitor
- Smart meter
- Data storage applications
- Military electronics
- Detection of phase loss
- FPGA design
- Insulation fault location system
