MAX6854UK28D1+T Overview
As you can see, this power management is mounted through 5 terminals. A Tape & Reel (TR) package is used to package the power management. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of SOT-23-5 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. Power ics operate at 1 supply voltages. The mount is provided by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 5 pins on the board. 5 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The supply current of the power management is 7μA.
MAX6854UK28D1+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6854UK28D1+T Applications
There are a lot of Maxim Integrated MAX6854UK28D1+T Voltage Supervisors applications.
- Fire equipment power monitoring system
- Smart meter
- Analog circuit
- Electrical fire monitoring system
- Military communications
- Cloud computing
- Battery cars
- External alarm
- Detection of phase sequence
- Electronics installed in the vehicle
