MAX6854UK25D1+T Overview
A total of 5 terminals are used to mount this power management. In terms of packaging, power management follows the Tape & Reel (TR) model. In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 2.5V supply voltages. When 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 5 pins on the board. 5 pins are on the supervisor. IC management can only work with a supply voltage of 1.1V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. For this power management, there is an 7μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6854, which is the base power ics number.
MAX6854UK25D1+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6854UK25D1+T Applications
There are a lot of Maxim Integrated MAX6854UK25D1+T Voltage Supervisors applications.
- DSP
- External alarm
- Refrigeration
- Battery cars
- Smartphones
- Rechargeable batteries
- DC stabilized power supply module
- Automotive power systems
- Important electronics for automotive protection
- Dash board
