MAX6842HUKD0+T Overview
Power management is mounted through 5 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). To assist you, this IC power includes 1 functions. On this supervisor, there is a series of 1 channels that can be found. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. During the reflow process, a peak temperature of 260 is specified for the package. Power ics operate at 1 supply voltages. Power management is included in the Surface Mount mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, it has 5 pins on IC management. The pins of the power management system count 5. There should be a minimum voltage supply (Vsup) of 750mV for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 1.8V volts. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain, Push-Pull. There is a 8.1μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX6842, the base power ics number.
MAX6842HUKD0+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 750mV
8.1μA operating supply current
MAX6842HUKD0+T Applications
There are a lot of Maxim Integrated MAX6842HUKD0+T Voltage Supervisors applications.
- Battery cars
- Stable power system
- Power distribution systems of infant care room
- Automotive permanent magnet synchronous motors
- Kitchen appliances
- FPGA design
- Fire equipment power monitoring system
- Power distribution systems of operating room
- Leakage protection
- Refrigeration
