MAX6842FUKD0+T Overview
Power management is mounted through 5 terminals. Packaging is in the form of a Strip. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this IC management you will find SOT-23-5 functions for you to refer to. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Packages are specified to have an average peak reflow temperature of 260. During operation, the power ic is supplied with a voltage of 0.9V. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 5 pins on power management. Power managment ic pin count is 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 750mV, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 1.8V volts. As far as the supply current of the power management is concerned, it is 8.1μA.
MAX6842FUKD0+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 750mV
8.1μA operating supply current
MAX6842FUKD0+T Applications
There are a lot of Maxim Integrated MAX6842FUKD0+T Voltage Supervisors applications.
- Battery-powered equipment
- Smartphones
- Embedded computing
- FPGA design
- Transformer load monitoring equipment
- Solar power charger
- Digitally controlled LDO regulators circuit
- Radar
- Sensitive sensors
- Automotive permanent magnet synchronous motors
