MAX6840XSD3+T Overview
There are 4 terminals connected to this power management, which makes it easy to mount. It is packaged with Strip. For your reference, this IC power includes a list of 1 functions. A series of 1 channels can be found on this supervisor. There are SC functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. During operation, the power ic is supplied with a voltage of 1.2V. Power ics operate at 1 supply voltages. The mount is provided by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. It has a total of 4 pins that are attached to IC management. Pin count of the power management is 4. There should be a minimum voltage supply (Vsup) of 550mV for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 3.6V volts. For this power management, there is an 16μA volt supply current.
MAX6840XSD3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 550mV
16μA operating supply current
MAX6840XSD3+T Applications
There are a lot of Maxim Integrated MAX6840XSD3+T Voltage Supervisors applications.
- Fire equipment power monitoring system
- Battery cars
- Leakage protection
- Kitchen appliances
- Display equipment
- Unattended substation automation
- Sensitive sensors
- Stable power system
- Digitally controlled LDO regulators circuit
- emergency room
